Restoring a Damaged Car Body Kit Post-Crash > 자유게시판

After an accident, your car’s body kit may be scratched, requiring immediate attention. Repainting it can prevent rust and UV degradation. Begin by gently detaching the body kit from the vehicle. Use the proper tools and refer to the spec sheet to avoid snapping mounting points.

Once removed, degrease the entire piece using a high-quality degreaser to eliminate grease. This step is critical to ensure the finish lasts longer.

Next, check for flaws for cracks. If you find shallow gouges, apply automotive filler to smooth them out. Allow the filler to dry completely, then sand it with increasingly smooth sandpaper starting at 100 grit and moving up to 800 grit. This creates a smooth, auto part dubai even surface.

After sanding, remove all dust using a tack cloth to eliminate debris.

Mask off sealing surfaces using high-quality masking tape and plastic sheeting. Ensure edges are pressed firmly to prevent paint seepage.

Before applying color, spray on a adhesion-promoting base coat designed for composite body kits. This improves durability. Let the primer set for 30–60 minutes, then lightly sand it using 800 grit paper for a uniform matte base.

Now you’re ready to paint. Use a plastic-rated automotive paint. Apply multiple mist layers, allowing each coat to set for the recommended time as specified. Four to five thin layers yield far better results than a single heavy application. Use a HVLP spray system held 15–20 cm from the surface, moving in fluid side-to-side motions. Avoid overlapping excessively to prevent sagging.

After the final color coat dries, apply a UV-resistant clear for protection. Apply three even passes using the uniform motion as the color coat. Let the clear coat cure for at least 24 hours.

Once fully cured, machine buff with foam pad using a ceramic-grade glaze to remove minor imperfections.

Reattach the body kit to your vehicle using the factory bolts, ensuring correct positioning. Always verify gap consistency before fully securing all retainers.

Finally, check under multiple lights under different lighting conditions to verify hue consistency. If needed, fill pinholes with a small artist’s brush and color-matched aerosol.

With careful masking and attention to detail, a repainted body kit can look factory fresh and protect your car for years.