9 Things Your Parents Taught You About Car Ignition Lock > 자유게시판

Why is My Car Ignition Locked?

There are a variety of reasons your ignition could be stuck. One reason is that the key is dirty or has a broken wafer inside it. This can be fixed by sliding the key into and out of the cylinder multiple times.

The pins on the lock cylinder may also be stuck. You can tap the cylinder lightly with a small tack-hammer.

Check the Battery

If your car Ignition lock is in Park or neutral, but doesn't come on when you insert the key into the ignition, there could be a problem with the shifter switch for the transmission. You can fix it by moving the gear shifter upwards or down to put the car into the gear.

If it's still not turning, the problem may be with the neutral safety switch or the transmission shifter cable. They can be fixed by a mechanic or a local locksmith for cars.

It is also possible that the ignition cylinder has worn out. In time both the ignition and key can become worn out making them difficult to remove or insert. A lubricant such as silicon lock lubricant, can help solve this problem by allowing the wafers to slide into place.

The key could get clogged with lint in your pockets and adhesive from tape used to keep packages in place. This prevents the key from sliding into the ignition. You can clean the keys with a cloth or a cleaner such as Triflow, to solve this problem. You may also try a spare key to determine if the problem is with the ignition lock repair or the key.

You could also tap the key using a small hammer while it's in the ignition. This can cause a slight vibration, which may cause enough vibration to loosen the ignition's wafers and allow them to slide into place. However, you must be careful not to damage the ignition key or cylinder.

If all of the above solutions are unsuccessful, it's time to call a locksmith or automotive mechanic to examine the issue. The key might be broken within the cylinder for ignition, or it might be time to replace it completely. Locksmiths can create a replacement key if the problem is with the key. If the cylinder in the ignition is the issue then you'll need to bring the car to a repair shop for it to be repaired. Luckily, these issues are usually very easy to solve.

Check the steering wheel

A steering wheel that is locked may cause the ignition to stop turning. It can happen when a driver accidentally engages the steering wheel while they exit or get into the vehicle. This is usually caused by yanking the wheel while being able to hold it against their body. It can also happen if someone in the rear seat accidentally engages the brakes as they exit the vehicle.

Luckily it's an easy fix and doesn't require a trip to locksmiths or mechanics. First, check that the gear shift is in neutral or Park. If it's not then gently pull or push the gear shifter until it shifts to one of these positions. Also, you should activate the handbrake or press the brake prior to turning the key.

If the wheel isn't locked, a quick examination of the steering column should confirm that the key is engaged with the lock cylinder. This is usually marked by a tiny "Lock" label on the lower part of the ignition circle. You can easily disengage this by gently moving the key or pulling it with moderate force. It is essential not to use too much force as this could cause damage to the key or even break off a wafer inside the lock cylinder.

A spare key can also be used to unengage the lock. This could indicate that the original key has damaged and no longer able to engage the wafers in the lock cylinder. If this is the case then a professional at Karl Chevrolet Webster City will be able to make an appropriate replacement key.

If the key doesn't engage after spraying the penetrating lubricant it may aid. Apply a small amount penetrating oil to the keyhole and ignition. Then, jiggle the key or tap it lightly to get it working. If this isn't working, you'll likely need to see a specialist at your local dealership for cars. They'll be able to give you a new key, and will also replace the ignition cylinder, in the event that it is required.

Check the Key

If you are unable get your key to turn the ignition, it is possible that something is wrong with your key. You can try getting rid of any foreign material that is on the key (lint and adhesive from packing tape, etc.). You may also try the key with rubbing alcohol or Goo Gone to see if it helps.

It could be that the lock pins inside are not moving properly when you insert the key. If you have an extra key to test, try placing it into the ignition and gently sliding it back out. You should be capable of hearing and feeling the pins move inside. If not, you can apply lubrication to the pins using powdered graphite. You can purchase graphite in small tubes that can be put directly into the keyhole. This will allow the pins to slide into position when you insert the key and stop them from becoming stuck.

It is possible that your key has become worn out or damaged and isn't able to work with the pins within the ignition cylinder. This could cause the cylinder to stop to turn, which can prevent you from starting your car. If this happens you'll need to take your vehicle to a locksmith or repair shop for assistance.

If you're able to turn the vehicle with an extra key and you've eliminated any issues with the steering wheel or battery it could be because the ignition cylinder has worn out. You can try to unlock the lock by using an abrasive screwdriver or handle of the hammer. Do not use the head. Often, tapping gently on the cylinder will release it to allow you to turn your car key. If this doesn't work, you'll need to have the lock cylinder replaced by an expert mechanic.

Check the Ignition Socket

The ignition socket is the place where your key can slide in and out when you insert it. It is prone to getting blocked with debris, or just wear and tear. Try putting some silicon lock lubricant (like WD-40) into the ignition to help things move forward.

You can also use the small hammer, and tap gently on the inside of the ignition barrel replacement near me to try to loosen or reset the pins that are not aligned. Be careful not to overdo this, or you could cause serious damage to the ignition switch.

It is crucial to confirm that your car's gearbox is set to park or neutral before you attempt this. Many modern cars have an option to stop the steering wheel from turning when it is not in park or neutral, which can prevent the key from being turned in the ignition.

If you have tried all of these steps but your key is still unable to turn, it could be that the ignition housing needs to be replaced. Different vehicles have different methods of replacing the ignition cylinder, so it is crucial to follow the correct procedure.

Generally, this involves taking off the plastic cover that covers the steering column and ignition cylinder lock repair assembly. To remove this cover, you'll have to first adjust the tilt-wheel to the lowest setting and then unscrew any fasteners that are holding it in place.

After you have removed the cover, you'll need to take off the old ignition cylinder from the steering column. Then, you will need to check the new ignition cylinder you purchased with the one you removed to make sure that they are the same. After this you can then install the new ignition cylinder in the same way that you did with the old one.

It is possible that even with our best efforts, an ignition could be damaged and require to be replaced. It is suggested that if this happens, you call an Tempe Locksmith. A locksmith can assist you choose the right replacement and ensure it is installed correctly so that your car can start again.